Description
Product description HPL Primer Plate
Seal-it® 525 CLEAN & BOND (tin 500 ml) is a fast-drying cleaner and primer in one product, specially developed as an adhesion promoter for sealants and adhesives on non-porous substrates. This primer cleans and prepares the surface of a Trespa© / HPL panel prior to bonding with HPL adhesive . The primer is applied with a lint-free cloth.
Using Seal-it® 525 CLEAN & BOND is crucial for the adhesive to adhere to the surface of the Trespa© / HPL panel, especially for panels with an acrylic UV protection. Be careful; absolutely no primer should be applied to the front of the panel as this will affect the UV protection, resulting in staining and colour difference!
Applications
- As a pre-treatment for various metal substrates, such as aluminium, steel, stainless steel, zinc, copper, lead, chrome, brass.
- As a pre-treatment agent for various powder-coated surfaces.
- As pre-treatment of various surfaces with a varnish and/or paint system, however, test in advance whether the substrate may be attacked.
- As a pre-treatment agent for polyester substrates, such as GRP, ABS and PVC.
Properties
- Improves the adhesion of sealants and adhesives on non-porous substrates.
- Fast-drying, maximum drying time approx. 5 -10 minutes.
- User-friendly, easy to process.
- Cleaner and primer in one, only one operation required.
- Time-saving, economic advantage.
- Efficient consumption.
- Effective operation.
- Not paintable.
Application conditions
- Processing temperature (ambient and substrate) between +5°C and +40°C.
- Substrate must be dry, clean, grease- and dust-free.
- Open the can for processing, using the twist-off cap and plastic seal on top of the can.
- Use Seal-it® 525 CLEAN & BOND not directly from the original packaging.
- Seal-it® 525 CLEAN & BOND pour into another glass/can, in an amount that can be processed in 30 min., then close the Seal-it tin® 525 CLEAN & BOND well off.
- Seal-it® Apply 525 CLEAN & BOND using a clean, dry, lint-free and non-dyeing cloth and/or tissue in a not too thick layer and/or several layers, so the surface is cleaned at the same time. Replace dirty cloth and/or tissue immediately.
- Apply sealant and/or adhesive only after the drying time has elapsed. (approx. 5 - 10 min.)
- After one Seal-it® 525 CLEAN & BOND has been applied to the substrate, for best results, we recommend carrying out the sealant and/or adhesive application within six hours.
- Avoid contact with treated surfaces, this may adversely affect adhesion.
Reviews
There are no reviews yet.